Bayrosoft® Light
Complete care for use with automatic dosing systems.
- ⚠️ PLEASE NOTE: Not available in the UK
-
For all filter types
-
For all pool sizes
-
Where: into the circulation circuit of the swimming pool, via dosing system
-
When: continuous treatment
-
Dosage: 1,5L per 10 m³
Use biocidal products with care. Always read label and product information before use.
This product is to be used exclusively for the specified purpose in accordance with this description.
- The dosage rate is 1.5 L per 10 m³, and the addition is done directly from the jerrycan.
- Initial addition: when the pool is freshly filled, add 3L of Bayrosoft® Light per 10m³ of water.
- If the pool water is already in use, first carry out a basic chlorination with Chloriklar®, Chlorifix® or Chloryte® . Wait until the chlorine level has dropped below approx. 0.5 - 1 mg/l and then add 3L of Bayrosoft® Light per 10m³.
- Weekly dosing: add 1.5L of Bayrosoft® Light per 10m³ using the automatic measuring, control and dosing system.
Important notes: Transport and store jerrycans only vertically. Protect from sun and contamination, never seal completely airtight. Observe the manufacturer's instructions as well as the operating instructions of the dosing pumps.
Product benefits
-
oxidation, algae prevention and clarifying effect
using automatic dosing systems like PoolManager® and Pool Relax®
-
dosing directly from the jerrycan
Absolutely foam-free and pH-neutral
-
Pleasant and odourless water quality without chlorine
Bayrosoft® Light is a chlorine-free multifunctional liquid active oxygen for oxidation, algae prevention and turbidity removal.
Bayrosoft® Light is odourless, soft to the skin and avoids eye irritation. The ready-to-use Bayrosoft® Light can be used in conjunction with an automatic measuring, control and dosing system (PoolManager®, Pool Relax®) as well as for manual dosing.
