Quicktest | Bayrol
You are looking for
A product, pool maintenance tips, solutions to the most common water problems?

Test strips for the analysis of free chlorine, pH-value, total-alkalinity and algaecide. Simple and fast.

Learn more

  • For all filter types
  • For all pool sizes
  • Where: dip the test strip directly into the water
  • When: once a week
  • Usage

    Always read label and product information before use.

    This product is to be used exclusively for the specified purpose in accordance with this description.

    • Dip entire test strip into the water, swish back and forth for 5 seconds and then remove it. Do not shake off the excess liquid and immediately compare pH with the colour chart.
    • Then wait another 10 seconds to determine the chlorine, total hardness and alkalinity values by colour comparison.
    • For the analysis of algaecide, dip the test strip for another 45 seconds into the water (without moving around). Then remove it and compare algaecide to colour chart.

    Important Notes: Protect test strips from sunlight and moisture. Store in a cool, dry place (storage temperature not above + 30°C) and reseal immediately after removing the test strips. Do not touch the test strips with your fingers. When stored properly, the test strips are durable until the expiry date printed on them.


  • Resources
  • Benefits

    Measures 4 parameters

    with only one strip

    Easy handling

    easy and immediately readable results

    No long handling (instant readings)

    no reagents or test tablets needed

    Quicktest are easy-to-use test strips for analysing pool water parameters: pH-value, TA-value (Total Alkalinity), free chlorine and algaecide.

    Each test strip has 4 measuring pads which react and change colour on contact with water. The values are then compared using the printed colour scale. Any discrepancies can be quickly corrected with the correct treatment products.

    One box contains 50 test strips.

    Was this content useful to you?