Protect & Shine
- ⚠️ PLEASE NOTE: Not available in the UK
-
For all filter types
-
For pools above 10m³
-
Where: directly into the water
-
When: every 7 days
-
Dosage: 40ml per 10m³
Always read label and product information before use.
This product is to be used exclusively for the specified purpose in accordance with this description.
- Shake the canister before use.
- Add the product undiluted directly to the water in front of the inlet nozzles with the circulation pump running.
- Allow the circulation pump to run for at least 12 hours after addition. The product may foam during application.
- Dosage: 40ml per 10m³ every 7 days.
Important notes: Close the container tightly before shaking. Wear protective gloves. Check pH with BAYROL test strips and adjust to the ideal range of 7.0 to 7.4 if necessary.
Caution: Never mix chemicals with other chemicals, either in solid form or in concentrated solution! Always dose product into water, not vice versa. Do not store below 5°C.
Product benefits
-
Compatible with all filter types and disinfection methods
40ml per 10m³ directly into the pool water every 7 days
-
Prevents dirt and grease build-ups at the waterline and in the skimmer
-
for even more transparent and sparkling pool water
Protect & Shine gives your pool the final touch. Thanks to its unique formula, the pool water becomes visibly brighter and crystal clear and the cleaning of the waterline much easier.
Protect & Shine is a liquid concentrate with unique and brilliant formula for even more transparent and sparkling pool water.
Thanks to special non-stick effect Protect & Shine additionally protects the waterline and skimmer from dirt and grease.
Protect & Shine is compatible with all filter types (cartridge, sand, glass) and all disinfection methods (chlorine, bromine, active oxygen).
In addition, Protect & Shine is economical to use, the 2L canister lasts for a whole season.
Use
-
Anti-redeposition power
Protect&Shine has anti-redeposition properties that make it easier to clean the water line and skimmers. It contains specific active agents that slow down the clogging of the water line and skimmers by dirt and grease deposits (sun oil, cosmetics, etc.).
-
Brilliant shine!
Protect&Shine is a ready-to-use liquid with a unique formula that makes water crystal clear. Protect&Shine's exclusive composition provides highly effective water clarification. The effect is quickly visible: water really sparkles.
Protect&Shine is compatible with all filtration systems (cartridge, sand filter), with no risk of filter clogging, and with all pool treatments (chlorine, active oxygen, bromine).
Frequently asked questions
-
Protect & Shine should be used to slow down the fouling of the water line and skimmers and make the water crystal clear and sparkling. Ideal for frequently dirty water lines and for pool owners who don't like to clean their water lines regularly.
-
40 ml per 10 m³ every 7 days directly into the pond, without diluting it, with the filter running and near the discharge nozzles.
-
Many greasy impurities (from creams, sun oils, make-up, etc.) are immiscible with water and settle on the air-water separation line. What's more, as the water evaporates on the surface, limescale deposits are also easily formed on this water line.
-
Water line cleaners are used to remove impurities accumulated on the air-water separation line. Alkaline water line cleaners (Bordnet, Adisan) are used mainly to clean fatty deposits, while acids (Bordnet Gel S, Protect & Clean) are preferred for removing limescale deposits.
-
Decalcit Super removes the most stubborn stains (limescale, metals). Lower the water level below the stains and clean them with a solution of Decalcit Super.
