SpaTime 5 functions test strips | Bayrol
You are looking for
A product, pool maintenance tips, solutions to the most common water problems?
SpaTime 5 functions test strips
SPA Water analysis

Test strips for quick and easy water analysis of pH-value, chlorine, active oxygen, alkalinity (TA) and total hardness of spa / jacuzzi.

  • Where: dip the test strip directly into the water
  • When: once a week
  • Homme_piscine

    SpaTime 5 functions test strips for quick analysis of spa / jacuzzi water parameters.

    Each test strip has 5 measuring pads which react and change colour upon contact with water.

    The values are then compared using the printed colour scale. Any deviations can be quickly corrected with the correct treatment products.

    • Benefits
      Measures 5 parameters

      with only one strip

      Easy handling

      easy and immediately readable results

      No long handling (instant readings)

      no reagents or test tablets needed

    • Use

      Always read label and product information before use.

      This product is to be used exclusively for the specified purpose in accordance with this description.

      • Dip entire test strip into the water, swish back and forth for 5 seconds and then remove it. Do not shake off the excess liquid and immediately determine the pH and active oxygen values, comparing with the colour chart.
      • Then wait another 10 seconds to determine the chlorine, total hardness and alkalinity values by colour comparison.

      Important Notes: Protect test strips from sunlight and moisture. Store in a cool, dry place (storage temperature not above + 30°C) and reseal immediately after removing the test strips. Do not touch the test strips with your fingers. When stored properly, the test strips are durable until the expiry date printed on them.

    • Resources
    Was this content useful to you?