Manual treatment
2) Permanent disinfection
SpaTime Active oxygen granules
SpaTime Active oxygen granules
Active oxygen granules for chlorine-free water disinfection.
Use biocidal products with care. Always read label and product information before use.
This product is to be used exclusively for the specified purpose in accordance with this description.
- Be sure to check the active oxygen content using SpaTime test strips immediately after the granules are completely dissolved (as it is not possible to take a correct measurement at a later time). The value should be at least 8mg/L. If the value is not reached, dose the same amount again.
- Dose the SpaTime active oxygen granules directly into the spa water before each use, with the circulation pump running.
- If the spa is heavily used, you will need to double the dosage amount for an effective disinfection.
Tip: Before dosing the disinfectant, you should check the pH-value using SpaTime test strips and, if necessary, adjust it to the correct value of 7.0 - 7.6.
Product benefits
-
without chlorine, gentle to skin and hair
highly concentrated
-
do not contain heavy-metals that could damage the spa / jacuzzi surfaces
-
no residue
SpaTime active oxygen granules disinfect the spa / jacuzzi water in a soft and gentle way.
Using this treatment method, the water is more gentle and is odourless.
Related products
Granules for decreasing the pH-value in the spa / jacuzzi.
Chlore Pastilles Multifunction SpaTime provides an anti-algae effect and permanent disinfection of your spa water.
Test strips for quick and easy water analysis of pH-value, chlorine, active oxygen, alkalinity (TA) and total hardness of spa / jacuzzi.
Liquid concentrate to enhance the efficacy of active oxygen granules.
