SpaTime Chlorine granules
Use biocidal products with care. Always read label and product information before use.
This product is to be used exclusively for the specified purpose in accordance with this description.
- Check the chlorine level with SpaTime test strips at least once a week and adjust if necessary (Ideal value: 1.0 - 1.5mg/L).
- The dosage amount depends on the measured chlorine level. Ensure that there is enough chlorine in the water at all times to prevent water treatment problems.
- Dose the chlorine granules directly into the spa / jacuzzi water after each use, while the circulation pump is running.
Tip: Before dosing the disinfectant, you should check the pH-value using SpaTime test strips and, if necessary, set it to the correct value of 7.0 - 7.6. Chlorine granules will then work in an optimal way.
Product benefits
-
High quality chlorine granules
does not influence the pH of the pool water
-
no residue
limits the degradation of active chlorine at high water temperatures
-
pleasant for skin and eyes
SpaTime Chlorine granules reliably disinfect the spa / jacuzzi water and ensure clear and hygienically pure water.
The granules dissolve quickly and work immediately against bacteria, turbidity and impurities in the spa / jacuzzi water.
Related products
Chlore Pastilles Multifunction SpaTime provides an anti-algae effect and permanent disinfection of your spa water.
Test strips for quick and easy water analysis of pH-value, chlorine, active oxygen, alkalinity (TA) and total hardness of spa / jacuzzi.
Granules for decreasing the pH-value in the spa / jacuzzi.
Granules for disinfecting your spa water. Eliminates chloramines and prevents water problems.
