Manual treatment
Water analysis
Private pool
Above ground pool

Electronic Pooltester

Waterproof device for automatic measurement of water parameters: pH, chlorine, total chlorine, bromine, stabiliser and alkalinity. Analyses water in private pools and spas with a simple gesture.
  • Electronic-Pooltester-II_Gallery
  • Electronic-Pooltester-II_Gallery-2
  • Electronic-Pooltester-II_Gallery-3
  • Electronic-Pooltester-II_Gallery-4
  • Electronic-Pooltester-II_Gallery-5
Find a retailer

  • For all types of filter

  • For any volume of water

  • From the pool

  • Toutes les semaines

  • Every week

Use this product only in accordance with the instructions on the packaging.

  • Switch on the Electronic Pooltester and open the cap.
  • Dip it into the pool to collect the water sample
  • Close the cap
  • Press zero then mode to select the type of analysis required
  • Insert the reagent corresponding to the selected analysis
  • Crush the tablet with the brush
  • Close the cap and shake for 15 sc
  • For free chlorine, pH, stabiliser and bromine, wait 15 seconds before pressing the test button to obtain the analysis result.
  • For total chlorine and tac, wait 2 minutes before pressing test to obtain the analysis result.

Product benefits

  • Modern, ergonomic design

  • Easy to use

    Based on the principle of photometry.

  • Transfer of results to the My Pool Expert and BAYROL Solution app.

For a well-treated pool, you need to analyse your water regularly. With the Electronic Pooltester, you can easily and accurately determine these essential values. Collect water directly from the pool, add a reagent and read the result on the screen.

The BAYROL Electronic Pooltester measures 6 essential water parameters: pH, free chlorine, total chlorine, bromine, alkalinity and stabiliser (isocyanuric acid). The results are displayed in record time: from a few seconds to just 2 minutes, depending on the parameters measured. No more reading results that are sometimes difficult to read when there are variations in light levels on colorimetric systems! You'll get an immediate, reliable and accurate reading of your pool's water parameters. And if you fall into the water, your Electronic Pooltester is safe! It's waterproof and won't sink.

Dangerous. - Observe safety precautions.

Learn more about the perfect pool treatment

Pool water tester – Frequently Asked Questions (FAQ)

  • There are several methods to measure pool water parameters:

    • Test strips: the simplest method.
      Dip the strip into the water. The colour change allows you to read the parameter values against a colour scale.
    • Manual Pooltester: a fast and reliable solution.
      The measurement is carried out by dissolving tablets in a small container filled with pool water. The result is read visually on a colour scale.
    • Electronic Pooltester: the most precise solution.
      The Electronic Pooltester allows you to measure pH, free chlorine, bromine, alkalinity and chlorine stabiliser. Results are available quickly and displayed digitally with decimal accuracy.

    Measurements with the Electronic Pooltester are the most reliable and precise.

  • Pool water analysis is an essential step – it is the key to healthy and comfortable bathing.

    Among the different methods available to measure pool water parameters, the procedure varies depending on the tool used: test strips, manual Pooltester or electronic tester. Always refer to the manufacturer’s instructions.

    To learn more about water analysis and the key parameters to monitor, click HERE.

  • To maintain clear and healthy water, pool owners should analyse their water regularly, taking several parameters into account.

    Water analysis is a crucial step – it is the key to safe and pleasant bathing.

    During the season, measure the pH value and disinfectant level at least once a week.

    Test more frequently during periods of high temperatures or heavy pool use.

  • Contrary to common belief, a salt chlorinator produces chlorine disinfectant from the salt in the pool.

    Thanks to the salt present in the water, the electrolyser cell generates chlorine. The chlorine produced disinfects the water by destroying and oxidising impurities.

    To measure the water parameters of a saltwater pool, use the Electronic Pooltester II, a connected photometer that measures up to 7 parameters: pH, TA (total alkalinity), free and total chlorine, bromine, chlorine stabiliser and active oxygen granules.

    Thanks to its Bluetooth connection, measured values can be easily transferred to a smartphone or PC via the My POOL EXPERT and BAYROL Solution apps, enabling precise analysis and accurate diagnostics.

Related products

Share